background image

AutoDose liquid detergent tank indicator. When it lights, appliance auto‐

matically doses the detergent.

This indicator appears beside 

 when Intensive option is set.

AutoDose softener tank indicator. When it lights, appliance automatically

doses the softener.

AutoDose status indicator. It lights when AutoDose function for additives

is disable.

Indicators for options downloadable via App only

Linked mode indicator. It lights when both AutoDose tanks are linked

and filled with the same detergent. AutoDose function for softener is dis‐
able: the indicator   disappears and the display shows two liquid deter‐
gent tank indicators 

.

These indicators will appear next to 

 and   when increasing or de‐

creasing the automatic detergent or softener dosage.

8. BEFORE FIRST USE

During installation or before

first use you may observe

some water in the appliance.

This is a residual water left

in the appliance after a full

functional test in the factory

to ensure the appliance is

delivered to customers in

perfect working order and is

no cause for concern.

1. Make sure that all transit bolts have

been removed from the appliance.

2. Make sure that the electrical power is

available and the water tap is open.

3. Make sure to fill the AutoDose tanks

with liquid detergent 

 and fabric

softener  . Refer to "AutoDose

basic setting " paragraph in "The

AutoDose technology" chapter.

4. Pour 2 litres of water inside the drum.

This action activates the drain system.

5. Set and start a programme for cotton

at the highest temperature without

any laundry in the drum.

This removes all possible dirt from the

drum and the tub.

9. THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.

9.1 Introduction

Right detergent and fabric softener

dosage takes better care of the laundry

and ensuring good wash performances.
Too much detergent damages your

clothes and too little doesn’t ensure good

wash performances.

This appliance is equipped with an auto

dosing system able to automatically

provide the right detergent and fabric

softener dosage to preserve the fabric

integrity and colour brightness.

ENGLISH

23

Summary of Contents for L7FEE945CA

































































Reviews: