9.
Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see
water flowing from the
drain hose. This is due to
the testing with water of
the appliance in factory.
10.
Remove the three bolts by using the
key supplied with the appliance.
11.
Pull out the plastic spacers.
12.
Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
3.2
Positioning and levelling
1.
Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the
appliance does not touch
the wall or other units.
2.
Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
www.aeg.com
8
Summary of Contents for L7WB86GW
Page 1: ...USER MANUAL EN User Manual Washer Dryer L7WB86GW ...
Page 43: ...ENGLISH 43 ...