A
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth 12.5 - 14 mm
depending on the depth of cupboard door)
on the inner side of the door.
The hinges will be fixed to the door by
means of the four supplied screws
A
.
max. 105°
To align the door perfectly,
make sure that the edge of
cupboard door is parallel with
the appliance edge and to
respect the proper opening
angle (max. 105 °).
Mounting the door
Fix the hinges to the hinge supports on the
appliance by means of the two supplied
screws
B
.
The hinges can be adjusted to
compensate for possible
uneven thickness of the door.
2
N
1
E
D
C
Counter-magnet
The appliance is pre set for a magnetic
closure.
For a correct closure:
1. Position the screw
C
and the counter-
magnet
D
on the magnetic plate
N
. Lean
the cupboard door against the screw
until it leaves a mark.
2. Open the cupboard door and screw the
counter-magnet
D
(steel disk + rubber
ring
E
) with the screw
C
in the inner side
of the cupboard door, where the screw
left the mark as described in the first
step.
ENGLISH
17
