background image

Maximum load indicator. The   icon flashes during laundry load esti‐

mation (refer to "PROSENSE load detection" paragraph).

Maximum laundry indicator. It flashes when the laundry load exceeds

the maximum declared load of the selected programme. If you run a
programme when the drum is overloaded, 

 also flashes at the

end of the programme.

Drying time indicator.

Door locked indicator.

The digital indicator can show:
• Programme duration (e. g. 

, washing and/or drying phase).

• Delay time (e. g. 

 or 

).

• Cycle end ( ).
• Warning code (e.g. 

).

Washing phase indicator: it flashes during prewash and wash phase.

Rinsing phase indicator. It flashes during rinse phase.

The permanent Extra Rinse option:

 - one additional rinse.

 - two additional rinses.

Spin and drain phase indicator. It flashes during spin and drain phase.

Steam phase indicator.

Drying phase indicator.

Child safety lock indicator.

Temperature indicator. The 

 indicator appears when a cold wash is

set.

Spin speed indicator.

Iron drying indicator.

Cupboard drying indicator.

Extra drying indicator.

www.aeg.com

16

Summary of Contents for L7WE786CBS





















































Reviews: