x
y
y
Cupboard door preparation
For countersinking the door, it
is recommended to call a
professional.
Align the cupboard door to the furniture
correctly.
Measure the distance
X
to fix the height of
the hole to countersink the upper hinge. The
centre of the hole
Y
should be at the same
height of the stroke on the hinge support.
16-22 mm
22±1,5 mm
449
mm
595-598 mm
Ø 35 mm
12,5 - 14 mm
Set the position of the lower hole respecting
dimensions and distances shown in the
drawing (449 mm).
Countersink the holes.
A
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth 12.5 - 14 mm
depending on the depth of cupboard door)
on the inner side of the door.
The hinges will be fixed to the door by
means of the four supplied screws
A
.
max. 105°
To align the door perfectly,
make sure that the edge of
cupboard door is parallel with
the appliance edge and to
respect the proper opening
angle (max. 105 °C).
ENGLISH
15
Summary of Contents for L7WEE741BI
Page 1: ...USER MANUAL EN User Manual Washer Dryer L7WEE741BI ...
Page 49: ...ENGLISH 49 ...
Page 50: ...www aeg com 50 ...
Page 51: ...ENGLISH 51 ...