WARNING!
• Do not remove the filter
while the appliance
operates.
• Do not clean the pump if
the water in the
appliance is hot. Wait
until the water cools
down
Proceed as follows to clean the pump:
1
2
1.
Open the pump cover.
2.
Place a suitable bowl below the drain pump
access to collect the water that flows out.
Always keep a rag nearby to dry up any water
spillages when removing the filter.
180˚
3.
Turn the filter 180 degrees in anti-clockwise
direction to open it, without removing. Let the
water flow out.
4.
When the bowl is full of water, turn the filter
back and empty the container.
5.
Repeat the steps 4 and 5 until the water
stops to flow out.
www.aeg.com
40
Summary of Contents for L7WEE741BI
Page 1: ...USER MANUAL EN User Manual Washer Dryer L7WEE741BI ...
Page 49: ...ENGLISH 49 ...
Page 50: ...www aeg com 50 ...
Page 51: ...ENGLISH 51 ...