background image

With the flap in the

position DOWN:

• Do not use gelatinous

or thick liquid

detergents.

• Do not put more

liquid detergent than

the limit shown on the

flap.

• Do not set the

prewash phase.

• Do not set the delay

start function.

5. Measure out the detergent and the

fabric conditioner.

6. Carefully close the detergent

dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

12.5 Setting a programme

1. Turn the programme dial to select the

desired washing programme. The

related programme indicator comes

on.

The indicator of the Inicio/Pausa button

flashes.

The display shows the maximum

declared load for the programme, the

default temperature, the maximum spin

speed, the washing phase indicators

(when available) and an indicative

programme duration.

2. To change the temperature and/or

the spin speed, touch the related

buttons.

3. If desired, set one or more options by

touching the related buttons. The

related indicators come on in the

display and the given information

changes accordingly.

To perform washing only,

make sure that only the

Lavar indicator is on above

the Lavar + Secar button.

In case a selection is not

possible, no indicator

comes on and an acoustic

signal sounds.

12.6 Starting a programme

Touch the Inicio/Pausa button to start the

programme.

The related indicator stops flashing and

stays on.

In the display, the indicator of the

operating phase starts flashing.

The programme starts, the door is

locked. The display shows the indicator

.

The drain pump can operate

shortly before the appliance

fills water.

12.7 Starting a programme

with the delay start

1. Touch this repeatedly until the

display shows the desired delay time.

The indicator Inicio diferido comes

on.

2. Touch the Inicio/Pausa button.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts.

The ProSense estimation

starts at the end of the

countdown.

Cancelling the delay start

after the countdown has

started

To cancel the delay start:

1. Touch the Inicio/Pausa button to

pause the appliance. The related

indicator flashes.

2. Touch the Inicio diferido button

repeatedly until the display shows  .

3. Touch the Inicio/Pausa button again

to start the programme immediately.

www.aeg.com

30

Summary of Contents for L7WEE852





















































Reviews: