11.1
Complete wash&dry
programmes
Automatic Non-Stop
programme
The appliance is equipped with the
NonStop 60min programme, an
automatic wash&dry programme where it
is not necessary to set the Secar mode.
To run this programme:
1.
After loading laundry and detergent,
press the On/Off button for some
seconds to activate the appliance.
2.
Set the NonStop 60min programme
by means of the programme dial.
The indicator
appears on the display
3.
Touch the Inicio/Pausa button to
start the programme.
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Lavar and Secar mode for
running a complete wash&dry
programme.
Proceed as follows:
1.
Press the On/Off button for some
seconds to activate the appliance.
2.
Load the laundry one item at a time.
3.
Put the detergent and the additives
in the appropriate compartment.
4.
Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry. The
display also shows the maximum
recommended load for washing
phase.
5.
Set the desired options, if there are
available.
6.
Touch the Lavar + Secar button once
to activate also the drying function.
The Lavar and Secar indicators come
on. The indicators
and
appear on the display. The display
also shows the maximum
recommended load for a washing
and drying programme (e.g. 6 kg for
cottons).
7.
Now, you can choose an automatic
drying level or a specific timed
drying.
11.2
Washing and Drying -
Automatic levels
1.
Tap on the Sec. Auto button
repeatedly until the display shows
the required dryness level. The
indicators in the display illuminate
accordingly:
a.
Iron dry
: for cotton
items;
b.
Cupboard dry
: for
cotton and synthetic items;
c.
Extra dry
: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2.
Touch button Inicio/Pausa to start
the programme. The PROSENSE
estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
11.3
Washing and Timed
Drying
1.
Tap on the button Tiempo/Tempo
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator goes off and
the indicator
comes on.
Each time you tap on this button the
time value increases by 5 minutes. The
display shows the set new time value.
ENGLISH
29
Summary of Contents for L7WEE861
Page 1: ...USER MANUAL EN User Manual Washer Dryer L7WEE861 ...
Page 45: ...ENGLISH 45 ...
Page 46: ...www aeg com 46 ...
Page 47: ...ENGLISH 47 ...