5.
Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see water
flowing from the drain
hose. This is due to the
testing with water of the
appliance in factory.
6.
Remove the three bolts, the hose
holders and plastic spacers by using the
spanner supplied with the appliance.
F
G
7.
Close the holes with the plastic caps
you find in the user manual bag. Put the
smallest cap
F
in upper hole and the two
bigger caps
G
in lower holes.
We recommend that you keep the packaging and the transit bolts for any
movement of the appliance.
ENGLISH
9