background image

8

Remote/Delay

Start touch

button

Press this button repeatedly to activate one of the two options or

both.

The relevant indicator comes on in the display.

 Remote

Select this option to connect appliance with App.
Touch this button, the display shows the indicator 

 blink‐

ing for a few seconds.

After touching the Start/Pause button, the display shows the
indicator   and the Remote is confirmed.

When touching the Start/Pause button after
the indicator 

 stops blinking, the Remote

Start is not activated, but the set programme

starts.

 Delay Start

With this option you can delay the start of a programme in a

more convenient time.

Touch the button repeatedly to set the required delay. The

time increases by steps of 30 minutes up to 90' and from 2

hours up to 20 h.

After touching the Start/Pause button, the display shows the
indicator 

 and the selected delay time and the appliance be‐

gins the countdown.

9

Plus Steam

touch button

This option adds a steam phase followed by a short anti-crease

phase at the end of the washing programme.

The steam phase reduces fabric creasing and facilitates the fabric

ironing.
The indicator 

 flashes on the display during steam phase.

This option can increase the programme duration.

When the programme stops the display shows a zero  , the indi‐
cator 

 is steady on and the indicator 

 starts flashing. The

drum performs smooth movements for about 30 minutes to keep

the steam benefit. By touching any button the anti-crease move‐

ments stop and the door unlocks.

A small laundry load helps to reach better results.

www.aeg.com

16

Summary of Contents for L8FEC966CA





























































Reviews: