background image

7.10 

Drawer open indication

When a programme is running, the

detergent drawer must always be closed.
A sensor in the drawer detects if the

drawer is open (or not properly closed)

while the programme is running. In such

case, the appliance will immediately be

paused.
If you press the Start/Pauze button, an

error sound is generated and everything

in the display will turn off except the

AutoDose indicators remain lit for a few

seconds. Then the display returns to the

previous paused state.
This will happen even if the user turned

AutoDose off.
To restart the programme, ensure the

drawer is properly closed and press

Start/Pauze button.

8. 

PROGRAMMES

8.1 

Programme Chart

Washing programmes

Programme

Programme description

Washing programmes

Katoen

White cotton and coloured cotton

. Normal, heavy and light

soil.

Katoen Eco

1)

White cotton and coloured cotton

. Normal, heavy and light

soil.

ÖKOPower

Cotton and fast-coloured synthetic items

. Complete washing

programme that, in only 59 minutes, washes the daily soiled
laundry intensively and ensures a good washing performance
in a short time.

Synthetica

Synthetic items or mixed fabric items

. Normal soil.

Fijne Was

Delicate fabrics such as acrylics, viscose and mixed fabrics
requiring gentler washing

. Normal soil.

Wol/Zijde

Machine washable wool, hand washable wool and other
fabrics

 with «hand washing» care symbol

2)

.

Steam programme

ENGLISH

27

Summary of Contents for L8FEN96CQ

























































Reviews: