Water hardness levels
Levels
Water hardness range
°f
1)
°d
2)
°e
3)
mmol/l
ppm
Soft
<15
<8
<10
<1.4
<140
Medium
4)
15 - 25
8 - 14
0 - 17
1.5 - 2.5
150 - 250
Hard
>25
>14
>17
>2.5
>250
1) French degrees
2) German degrees
3) English degrees
4) Factory setting, able to satisfy most of the use conditions.
8.4 AutoDose configuration
mode
Enter the AutoDose
configuration mode before
proceeding with any
programme setting. The
configuration mode may
cancel temporary settings .
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in configuration mode, hold
pressed the Temperature and the
Spin buttons simultaneously for a few
seconds until the display shows the
on the left in the display and
blinking detergent tank
and
softener tank indicators on the
right in the display.
4. Touch related tank buttons to toggle
function off and on. The display
shows OFF when a tank is disabled
or shows tank indicator when it is
enabled.
5. To set basic dosage touch related
tank buttons until default dosage
laundry product and two arrows on
bottom of display appear. Touch the
Temperature button repeatedly to
adjust the dosage upwards and the
Spin button to adjusts it downwards.
Minimum step is 1 ml.
6. After about 10 seconds the display
returns to the programme information
screen or hold pressed the
Temperature and the Spin buttons
again to exit immediately.
www.aeg.com
24
Summary of Contents for L8FQS967C2
Page 1: ...USER MANUAL EN User Manual Washing Machine L8FQS967C2 ...
Page 59: ......