It is possible to see water
flowing from the drain hose.
This is due to the testing
with water of the appliance
in factory.
15.
Remove the three bolts by using the
spanner supplied with the appliance.
16.
Pull out the plastic spacers.
17.
Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
5.2
Positioning and levelling
1.
Install the appliance on a flat hard
floor.
Make sure that the appliance
does not touch the wall or
other units.
2.
Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When a tumble dryer is
stacked on the washing
machine, use the accessory
described in chapter
'Accessories'. Read carefully
the instructions supplied
with the appliance and with
the accessory.
www.aeg.com
10