background image

8.3 Temp. 

When you select a washing programme,

the appliance automatically proposes a

default temperature.
Touch this button repeatedly until the

desired temperature value appears on

the display.
When the display shows the indicators

 and 

, the appliance does not heat

the water.

8.4 Spin 

When you set a programme, the

appliance automatically selects the

default spin speed.
Touch this button repeatedly to:

• Change the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option .

The water of the last rinse is not

drained out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum and the

final spin phase is not performed.
The display shows the indicator 

.

The drum turns regularly to reduce

creasing.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch Start/Pause button: the

appliance performs the spinning

phase and drains the water.

• Activate the Quiet option.

All spinning phases (intermediate spin

and final spin) are suppressed and

the programme ends with water in the

drum. This helps to reduce creasing.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are

available. In some programmes the

rinses are performed with more water.
The display shows the indicator  .

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch the Start/Pause button: the

appliance performs only the draining

phase.

The appliance empties the

water out automatically after

approximately 18 hours.

8.5 Stains/Prewash 

Press this button repeatedly to activate

one of the two options.
The relevant indicator goes on in the

display.

• Stains 

Select this option to pre-treat heavily

soiled or stained laundry using stain

remover.

Pour the stain remover into
compartment 

. The stain remover

is pre-mixed and heated with

detergent in order to improve its

effectiveness.

This option can increase

the programme duration.

This option is not

available with a

temperature lower than

40 °C.

• Prewash 

Use this option to add a prewash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

This option can increase

the programme duration.

These two options cannot be

set together.

8.6 Delay Start

With this option you can delay the start of

a programme in a more convenient time.
Tap on the button repeatedly to set the

required delay. The time increases by

steps of 30 minutes up to 90' and from 2

hours up to 20 h.

www.aeg.com

18

Summary of Contents for L8WEC166C

























































Reviews: