background image

Cupboard drying indicator.

Extra drying indicator.

8. DIAL AND BUTTONS

8.1 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.
As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.
For more details, refer to Stand-by

paragraph in Daily Use chapter.

8.2 Introduction

The options/functions are

not selectable with all

washing programmes.

Check the compatibility

between options/functions

and washing programmes in

the "Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

8.3 Temperature 

When you select a washing programme,

the appliance automatically proposes a

default temperature.
Touch this button repeatedly until the

desired temperature value appears on

the display.
When the display shows the indicators

 and 

, the appliance does not heat

the water.

8.4 Spin 

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.
Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Set the drain-only option (Skipping

the wash, rinse and spin phases):

Drain.

The appliance performs the only

draining phase of the selected

washing programme.
The display shows the indicator 
(cold), and the indicator 

 (no

spin) and the indicator  .

• Set the spin-only option (Skipping

the wash and rinse phases) : Spin.

Before setting this option,

select a suitable washing

programme for the

garments. The appliance

will performs the most

fitting spin cycle for your

garments care (e.g. For

synthetics items, first

select the Synthetics

washing programme and

then the Spin option).

The appliance performs only the

spinning phase of the selected

washing programme.
The display shows the indicator 
(cold), the phase indicator   and the

spin speed.

ENGLISH

17

Summary of Contents for L8WEE165C

























































Reviews: