If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts
without repeating
the ProSense phase
. The
water and the detergent are
not drained out in order to
avoid waste.
11.13
Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1.
Touch the Inicio/Pausa button.
In the display the related door lock
indicator goes off.
2.
Open the appliance door. If
necessary, add or remove the items.
3.
Close the door and touch the Inicio/
Pausa button.
The programme or the delay start
continues.
4.
The door can be opened when the
programme is complete, or set
spinning or draining programme/
option and than press Inicio/Pausa
button.
11.14
End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Inicio/Pausa button
goes off.
The door unlocks and the indicator
goes off.
1.
Press the On/Off button to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2.
Remove the laundry from the
appliance.
3.
Make sure that the drum is empty.
4.
Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5.
Close the water tap.
11.15
Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the
water of the last rinse, the programme is
completed, but:
• The display shows the indicator , the
option indicator
or and the
door locked indicator
. The
indicator of the running phase
flashes.
• The drum still turns at regular intervals
to prevent the creases in the laundry.
• The door stays locked.
• You must drain the water to open the
door:
1.
If necessary, touch the Centrif.
button to decrease the spin speed
proposed by the appliance.
2.
Touch the Inicio/Pausa button:
• If you have set
, the appliance
drains the water and spins.
• If you have set , the appliance
only drains the water.
The option indicator
or goes off,
while the indicator flashes and then
goes off.
3.
When the programme is completed
and the door locked indicator
goes off, you can open the door.
4.
Press the On/Off button a few
seconds to deactivate the appliance.
ENGLISH
31
