Plug the open holes with the plugs which you
will find in the plastic bag containing the
instruction booklet.
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by
carpets, rugs etc.
• Before placing it on small tiles, apply a rubber coating.
• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.
• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;
• The machine must not be installed in rooms where the temperature
can drop below 0°C.
• The water inlet hose and the drain hose must not be kinked.
• Please ensure that when the appliance is installed, it is easily accessi-
ble for the engineer in the event of a breakdown.
Levelling
Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.
Installation on a suspended floor
Suspended wooden floors are particularly
susceptible to vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick under the appli-
ance, secured to at least 2 floor beams with screws. If possible install
the appliance in one of the corners of the room, where the floor is
more stable.
50
Installation
P0002
132994040.qxd 1/22/03 9:16 AM Pagina 50 (Nero/Process Black pellicola)
Summary of Contents for LAVAMAT 14810
Page 55: ......