In the event of operating problems, some alarm codes can be displayed, for example
(see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero is displayed, the DOOR pilot light
(
10.2
), the WASHING pilot light (
10.1
) and the pilot light of button
8
go out and the door
can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message
Err
is displayed for about 2 seconds and the yellow pilot light of button
8
light starts blink-
ing.
7.2 Delay start:
The selected delay (20 hours max) set by means of the relevant button appears on the dis-
play for about 3 seconds, then the duration of the previously selected programme is dis-
played. The symbol
7.2
will appear on the display. The delay time value decreases by one
unit every hour. When only 1 hour remains, the time decreases every minute.
7.3 Child safety lock
symbol
Indicator pilot lights (10)
After having pressed the button
8
, the WASHING
pilot light (
10.1
) comes on.
When the pilot light
10.1
comes on this means
that the machine is operating.
The DOOR pilot light (
10.2
) indicates if the door
can be opened:
• light on: the door cannot be opened.
• light blinking: the door is opening.
• light off: the door can be opened.
When the appliance is performing additional rinses the EXTRA RINSE pilot light (
10.3
)
comes on. To add an additional rinse, please see chapter «Select an additional rinse».
PERSONALIZATION
Acoustic signals
The machine is provided with an acoustic device, which sounds in the following cases:
• at the end of the cycle
• in the event of operating problems.
By pressing the
3
and
4
buttons simultaneously for about 6 seconds, the acoustic signal is
deactivated (except for the events of operating problems). By pressing these 2 buttons
again, the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unsupervised and not to worry that children
might be injured by or cause damage to the appliance.
This function remains able also when the washing machine is not working.
There are two different ways to set this option:
A
B
C
10
Personalization
