• During a washing cycle, a black line blinks under the washing phase symbol of the run-
ning programme. At the end of each washing phase, the line under the corresponding
symbol becomes fixed.
If the OVERDOSAGE symbol lights up at the end of the programme, it indicates that too
much detergent has been used.
9.4
-
Options: PREWASH
, STAIN , SENSITIVE , EXTRA RINSE
9.5
-
DOOR
-
symbol (Door locked)
• This symbol indicates if the door can be opened:
– the symbol is on: the door cannot be opened. The appliance is performing a washing
programme.
– the symbol is off: the door can be opened. The washing programme is finished.
9.6
-
TIME SAVING
-
option symbol
9.7
-
The display shows the following information:
• Duration of the selected programme
– After selecting a programme, the duration is displayed in hours and minutes (for ex-
ample
. The duration is calculated automatically on the basis of the maximum
recommended load for each type of fabric.
– After the programme has started, the time remaining is updated every minute.
• Delay start
– The selected delay (20 hours max) set by means of the relevant button appears on the
display for about 3 seconds (for example
), then the duration of the previously
selected programme is displayed.
– The DELAY START symbol will appear on the display.
– The delay time value decreases by one unit every hour and then, when remains 1 hour,
the time decreases every minute.
• Incorrect option selection
– If an option which is not compatible with the set wash programme is selected, the
message
Err
is displayed for about 2 seconds and the yellow light of button
7
starts
blinking.
• Alarm codes
– In the event of operating problems, some alarm codes can be displayed, for example
(see chapter «What to do if...»).
• End of the programme
– When the programme has finished a blinking zero is displayed, the DOOR symbol
disappears and the door can be opened.
9.8
-
DELAY START
-
symbol
9.9
-
CHILD SAFETY LOCK
-
symbol
9
Summary of Contents for LAVAMAT 74950M3
Page 1: ...LAVAMAT 74950 M3 EN WASHING MACHINE USER MANUAL ...
Page 39: ...39 ...