This option increases the programme
duration.
If the Extra Rinse is set as a
default option and you
select a compatible washing
programme, the display
shows
. In this case, by
pressing the Extra Rinse
button , it is possible to add
just one rinse.
7.7
Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric creasing
and facilitates the fabric ironing.
The indicator
flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero , the indicator
is
steady on and the indicator
starts
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
7.8
Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator
.
7.9
Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button
once
to decrease the duration.
• In case of smaller load, touch this
button
twice
to set an extra quick
programme.
The display shows the indicator
.
This option can also be used
to shorten the Steam
programme duration.
7.10
Skipping phase button
(Option)
By touching this button you can set:
• Only Rinse at first touch. The washing
programme starts from the rinsing
phase by skipping the wash phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
• Spin Only at second touch. The
appliance skips wash and rinse phase.
• Drain Only at third touch. The
appliance performs only the drain
phase.
At firth touch the appliance
proposes the default setting
of the washing programme
again.
7.11
Delay Start
With this option you can delay the start
of a programme in a more convenient
time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator
and
the selected delay time and the
appliance begins the countdown.
7.12
Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
ENGLISH
15
