1. Touch the Remote start button
and the indicator
blinks on the
display for a few seconds.
2. Touch the Start/Pause
button to
activate the Remote Start before the
indicator
stops blinking.
The indicators and
appear on the
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pause
button after the
indicator
stops
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on the
Remote start button and confirm by
pressing the Start/Pause
button.
11.5 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
11.6 Wi-Fi Always On
The Wi-Fi Always On function is
available in the App.
This function keeps the appliance
connected to the network even when the
appliance is turned off.
The indicator goes on and off
intermittently (1 second on , 5 seconds
off).
It is possible to turn the appliance on by
pressing the On/Off button or through the
App.
The Wi-Fi Always On
function may affect your
energy consumption.
12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds. The appliance
automatically proposes a default
programme. The relevant indicator
illuminates.
The display shows the cycle duration, the
maximum load (for a few seconds), the
default temperature, the default spin
speed and the indicators of the phases
making up the programme.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
ENGLISH
29