67
5. Press the
●
REC key to stop or abort the
recording.
Note:
Files aborted during data transfer between
USB and card will not be saved.
Programmable Playback
Allows programming of an arbitrary track se-
quence.
1. Press and hold the / key (7) on the
device or press the key (4) on the RC.
2. Press the PROG key (13/11 on the RC).
“P-01” (memory)
fl
ashes on the display and
“PROG” appears. Select the desired track
using the / keys (6/8) and press the
PROG key again. The display will change to
memory P-02.
3. Select the next track using the / keys
and press the PROG key again. Repeat this
procedure till all tracks are chosen.
Note:
With the memory capacity reached by the
tracks to be programmed, “FULL” will
fl
ash on
the display.
4. Press the key (7/3) to start playback.
The display shows all track numbers in their
sequence; the symbol
►
MP3 or
►
WMA
and PROG appear on the display. You can
also suspend playback by this key.
5. Pressing and holding the / key (7) or
pressing the key (4) will stop playback but
the program will remain.
6. To resume playback of the program, please
fi
rst press the PROG key once and then
press the key.
7. To delete the program, press and hold the
/ key (7) or press the key (4). The
icon PROG will disappear.
The device stops automatically after playback
of all programmed tracks. The programmed
order will remain in the memory till you change
to normal mode or remove the CD or the device
is switched off.
You can combine the programmed tracks with
the REPEAT function. After programming and
starting the device, press the REPEAT/INTRO/
RAN key (12) (9 on the RC) up to 4x to apply
the modes as described in section “REPEAT/
INTRO/RAN”.
Please remark:
There is an abundance of burning and com-
pression modes as well as differences in quality
of USB storage media and SD/MMC memory
cards.
Due to these facts, in rare cases, problems
may occur with playback of USB storage media
and SD/MMC memory cards. This is not a mal-
function of the device.
Cleaning and Maintenance
• Before cleaning, pull the power plug.
• External stains can be removed by a slightly
moist cloth, without additives.
Technical Speci
fi
cations
Model:....................................MC 4420 CR/USB
Power supply:.................................230 V, 50 Hz
Input:............................................
.
..............14 W
Batteries (Remote Control): ...............................
.........................................1 x 3V, Type CR 2025
Protection Class:..............................................II
Net weight:................................................3,7 kg
Technical modi
fi
cations reserved!
This device has been tested according to all
applicable, current CE guidelines like electro-
magnetic tolerance and low voltage directive
and has been designed according to the latest
safety technology regulations.
Technical modi
fi
cations reserved!
English
MC 4420 CR_USB final IM for GEL 67 67
MC 4420 CR_USB final IM for GEL 67 67
2008-10-10 22:21:11
2008-10-10 22:21:11
