English
67
• The machine is not functioning properly, although the instructions in the user manual have been followed
to the letter.
• If the machine is physically damaged.
Laser system
1. This machine is equipped with a Laser system. In order not to be exposed to direct laser beams, try never to
open the housing. Laser beams may escape if the housing or drive lock is opened. Never look directly into the
laser light under any circumstances.
2. The presence of laser beams is indicated by the following warning.
CLASS 1 LASER PRODUCT
Cleaning the device
1.
CAUTION!
Before cleaning, switch off the device and disconnect from the mains.
2. Never spray or spill any fluid directly onto the housing.
3. Wipe the display and housing with a soft, dry and lint-free cloth. This will remove dust and other particles.
4. If very dirty, use small amounts of neutral liquid detergent (not containing ammonia or alcohol) and then dry
the machine with a soft, dry and lint-free cloth.
Disposal of Waste Electrical and Electronic Equipment
1. If the product carries a crossed out wheelie bin symbol or if this is found in the user
manual, this product complies with the requirements of EU Directive 2002/96/EC.
2. All waste electronic and electrical equipment must be disposed of separately to
domestic waste at the collection points provided by the local authorities.
3. By properly disposing of waste electronic and electrical equipment, you prevent
damage to the environment and protect your health.
4. You can find more information on the disposal of waste electronic and electrical
equipment from your local authority or from the authorised dealer from which you
purchased the device.
5. Before scrapping waste equipment, remove the batteries from the remote control in
order to properly dispose of them at the collection point.
Copyright Note
It is prohibited by law to copy, broadcast, display, transmit via cable, publicly reproduce or to distribute material
protected by copyright without the consent of the copyright holder.
Handling and care of discs
• Do not touch the pre-recorded side of a disc. Hold the disc by the rim in order not to touch its surface with
your fingers.
