ຫ
ׂ
֡ፕ
၂๖ೡఇ๕
൸၍
स٪ഗ
Ҿጎ
থ၍
ᆅჾ
ୟഗ
ۉጱྃ੩ഗ
ॲ
֪
INTRO
BREAKER
TRIP UNIT
LOCKS
ACCESSORIES
TESTS
APPENDIX
2.1-03
2.1
!
ׂຫ
2.1.1
!ྔ࠵
ۉጱྃ੩ഗਏᆶႚ!MDE!၂๖ೡă௬ӱᇑ3/2!๖௬ӱ
ૌຼăጎዃহ௬ᇕჾཚยዃྺᆈ࿔Ljᅜስ݆࿔Ăڤ
࿔ĂဇӬც࿔ईዐ࿔
2.1.2 LCD
!֡ፕ
ۉጱྃ੩ഗਏᆶ!6!߲ࠀీ॰Ljස!3/3!๖ăӀူඪᅪ॰
ీഔۯ!MDEă
๑ᆩኄ! 6! ߲Ӏ॰ᅜݡ࿚! TFUVQDŽยዃDžĂTUBUVT
DŽጒༀDžĂNFUFSDŽᅏDžࢅ!FWFOUTDŽ้क़Dž႑တă
..!VQDŽၠฉDžǖၠฉࡐۯईሺेຕኵă
..!EPXODŽၠူDžǖၠူࡐۯई३ၭຕኵă
..!SJHIUDŽၠᆸDžǖူᅃࠀీईူᅃᄻă
..!MFGUDŽၠፑDžǖฉᅃࠀీईฉᅃᄻă
..!FOUFSDŽඓۨDžǖԍ٪ईยዃڟ٪ئഗዐă
2.1.3
!
ۉഘᄲ൱
2.1.4
!
ยԢহ௬
ME09 5000-6400A
!ୟഗă
ٷևݴ൧ူLjۉጱྃ੩ഗႴথথڟยԢăᆶದ၍
ᇨۨᆩᇀথୟഗई؏ॐă
ഄยԢႴڦথԈઔڦ൶ᇘስĂीۉഗ
0ࢅዐႠدߌഗLj๑ᆩୟഗْܾথ܋ጱฉڦ༬ۨጆ
ᆩথۅă
ܔ ႑ ࡽ DŽ 2 ࡽ Dž ႜ Պ ײ Lj ᅜ Ս ૧ ᆩ ३ ณ ڦ ຨ ้!
) S F M U * ई ਸ ୟ ഗ ă ܾ ْ DŽ 3 ࡽ Dž ᅜ ย ዃ ྺ!
ĐPGGđLjईཚࡗՊײยዃྺৈਸୟഗă
2.1 Product descrip
Ɵ
on
2.1.1 Appearance
The Trip Unit includes a graphical LCD. The front panel being
similar to that depicted in Figure
2.1. Normally the device is set to the English language,
op
Ɵ
onally French, German, Spanishor Chinese can be selected.
2.1.2 LCD ACCESS
The trip unit has
Į
ve func
Ɵ
on keys as shown in Figure 2.2. Any
key, when pressed, powers up the LCD.
All SETUP, STATUS, METER and EVENTS informa
Ɵ
on is accessed
through these
Į
ve keys.
-- UP: Scroll up or increment value
-- DOWN: Scroll down or decrement value
-- RIGHT: Next func
Ɵ
on or next page
-- LEFT: Previous func
Ɵ
on or previous page
-- ENTER: Save or set in to memory
2.1.3 Electrical Requirements
None: Plug in installa
Ɵ
on. Done on de-energized units.
2.1.4 Equipment Interfaces
ME09 5000-6400ACircuit Breakers.
Trip units, for the most part, do not require direct connec
Ɵ
ons to
the equipment. All wiring is intended to connect to the circuit
breaker or casse
Ʃ
e.
Connec
Ɵ
ons that are required for other equipment are the
op
Ɵ
onal zone-selec
Ɵ
ve interlock, relay in-output and the neutral
sensor, which uses speci
Į
cally dedicated connec
Ɵ
on
points on the breaker secondary connec
Ɵ
on terminals.
A signal Input (nr.1) can be programmed to allow for the use of
reduced instantaneous (RELT) or to trip the breaker. A second
input (nr.2) can be set to ‘OFF’ or programmed to trip
the breaker only.
!
2.1
MDE!၂๖ೡ
ۉ࢈
॰ፗ
B V U P 0 N B O DŽ ጲ ۯ 0
ۯDžް࿋ስ
ඇݔྷܮ֭ۨཀྵ
无：接通装置电源。在释放单元上完成。
Fig. 2.1
LCD screen
Ba
Ʃ
ery Compartment
KEY pad
AUTO/MAN reset choice
Full Range Ra
Ɵ
ng Plug
Fig 2.2 Key pad
Up
Down
Right (Next)
Le
Ō
(Previous)
Enter (Save)
!
2.2
!॰ፗ
ၠฉ
ၠူ
ၠᆸDŽူᅃ߲Dž
ၠፑDŽฉᅃ߲Dž
ඓණDŽԍ٪Dž
NF1:ဣଚگუഘୟഗ
SET UP
METER
STATUS
EVENTS
