2.6-01
NF1:ဣଚگუഘୟഗ
ຫ
ׂ
֡ፕ
၂๖ೡఇ๕
൸၍
स٪ഗ
Ҿጎ
থ၍
ୟഗ
ॲ
֪
BREAKER
LOCKS
ACCESSORIES
TESTS
APPENDIX
ᆅჾ
ۉጱྃ੩ഗ
INTRO
TRIP UNIT
2.6
Ҿጎ
०ᄲຫ
ᆶ! NF1:! ഘୟഗದᆶຕጴۉጱۉጱྃ੩ഗLjۉጱ
ྃ੩ഗᆶ!T!ࢅ!O!ଇዖएԨ႙ࡽă
ܾዖ႙ࡽਏᆶ၎ཞڦยऺLjದᆶ၂๖ೡLj༵ࠃۉୁऺLjཚ
ࡗ०ڇጚඓڦ֓ڇ֡ፕᅜሞ࠽ݘڦۉୁݔྷాۙবୟ
ഗ֖ຕă
๑ᆩ! 5! ߲ยዃ॰ࢅᅃ߲ඓණ॰ཚࡗ֓ڇኴႜᆶࠀీLj
ܸٗీࠕጚඓںยዃጎዃă
ۉጱྃ੩ഗҾጎ
2/ਸୟഗ௬ӱፇॲฉڦ!7!߲அۤDŽ!BDžLjൽူ௬ӱă
3/Nqsp!ۉጱྃ੩ഗҾጎሞ!QNV!एፗฉLjස!C!๖ă
Ӏቷ๖ݛ݆Ӏူ੦߇Ljܔዐۉጱྃ੩ഗă
4/ॽۉጱྃ੩ഗ౧ኟඓ֭!QNV!एፗాLjස!D!๖ă
5/ኟඓ֭ۉጱྃ੩ഗࢫݣ੦߇Ljኄᄣࣷॽۉጱྃ੩
ഗۨሞ!QNV!एፗዐLjස!E!๖ă
6/ࢫҾጎമ௬ӱă
Short descrip
Ɵ
on
All the ME09 power circuit breakers are equipped with a digital
electronic trip unit available in two basics versions S&N.
Each has a common design that comes with a screen providing
an ammeter and following a simple and accurate menu driven
adjustment of the breaker parameters across a board current
range.
All the func
Ɵ
onality is menu driven by using 4 se
ƫ
ng and one
enter key thus allowing a fast and accurate se
ƫ
ng of device.
TRIP UNIT INSTALLATION
1. Loosen the 6 screws (Fig. A) on the breaker fascia assembly
and remove the fascia
2. Mpro Trip unit is mounted on PMU base as shown in Fig. B.
Press the lever and align the trip unit as shown.
3. Insert the trip unit knob into the PMU base properly as shown
in Fig. C
4. Release the lever once the trip unit is insert properly, thus the
release of lever will lock the trip unit to the PMU base as per Fig. D
5. Then install the front cover.
2.6 INSTALLATION
ၠฉ
ၠᆸDŽူᅃ߲Dž
ၠူ
ၠፑDŽฉᅃ߲Dž
ඓණDŽԍ٪Dž
Ӏ॰
A
B
B
C
D
[PMU]