3.
2
3.2-05
LOCKS
؏ॐتᇀEJTDPOOFDUFEDŽਸDž࿋ዃ้Ljසࡕৈሞ
߇Dฉ๑ᆩࠬLjሶۨĐҾඇ֡ፕđڔӱDŽᅙҾጎ้Džă
࣏ᄲॽᄩդڦ੨ۨሞ؏ॐڦ൸դ֭ዐăୟഗت
ᇀEJTDPOOFDUFEDŽਸDž࿋ዃ้Ljᅜᆩႜۨ
֡ፕă
ྺඓԍҾඇLjፌܠ๑ᆩᅃ߲ࠬDŽႴٲ੩০ྺ! 4! ! 9!
nnDžăኄዖۨጎዃ࣏ᇑ२၎ग़ඹă
2/!ඓԍ࿋ዃኸ๖ഗ၂๖!EJTDPOOFDUFEDŽਸDž࿋ዃă
3/!සࡕ൸դ֭ฉᅙঢ়ᆶᄩդLjሶൽူᄩդă
4/! ઙۯ߇Ljᄅሞ֭ࠬٲ੩ڦࡗײዐᄲ
ॽ߇ઙዿփݣă९! C! ๖ă๑ᆩࠬࢫLjጎዃԥ
ۨă९!D!๖ă
5/!ኮࢫLj๑ᆩஅີژॽᄩդڔӱൻۯഗ!C!Ӏຩ้ኍ
ݛၠገă९!B!๖ă
6/! ൧ᆌྺLj݆ገᄩդڔӱൻۯഗC! ݆ॽᄩ
դ֭മ܋௬ӱฉڦ൸դ֭ዐă
7/! ॽҾጎሞ܋ጱമ௬؏ॐฉڦമڔӱฉူᅎۯDŽᆩ
ᇀೝዕ܋Lj९!EDžईፑᆸᅎۯDŽᆩᇀؽዕ܋Lj९!
FDžă൧ᆌྺLj݆ᅎۯڔӱă
3.2.2 Draw out Casse
Ʃ
e
Isola
Ɵ
on Shu
Ʃ
er Locking:
Security locking
Locks the Opera
Ɵ
on of Safety shu
Ʃ
ers, if installed any, when
pad lock applied on the security locking bar C only, when the
Casse
Ʃ
e is in DISCONNECTED posi
Ɵ
on. Also Locks the entry of
Racking handle in to the Crank Inser
Ɵ
on hole of the Casse
Ʃ
e.
Lock can be applied when Circuit breaker in the DISCONNECTED
posi
Ɵ
on.
Maximum One padlock (required hasp diameter is 3 ~ 8 mm)
May be applied for security. Also this locking Device is
compa
Ɵ
ble with scissor lock.
1. Ensure posi
Ɵ
on indicator shows DISCONNECTED Posi
Ɵ
on.
2. Remove racking handle from the Crank inser
Ɵ
on hole if
present already.
3. Pull the locking bar un
Ɵ
l the locking eye is exposed and hold
while inser
Ɵ
ng padlock hasp. Shown in Fig. B. Device is locked
out a
Ō
er padlock applica
Ɵ
on. Shown in Fig. C.
4. Then with a screw driver a
Ʃ
empt to turn the Racking handle
shu
Ʃ
er drive B clockwise. Shown in Fig. A.
5. Condi
Ɵ
on should be-Not able to Rotate racking handle
shu
Ʃ
er drive B & insert Racking handle in to the crank inser
Ɵ
on
hole on front panel.
6. A
Ʃ
empt to move the Front shu
Ʃ
er plate Up & down
(Applicable for Horizontal termina
Ɵ
ons Fig. D) or move le
Ō
to
Right (Applicable for ver
Ɵ
cal termina
Ɵ
ons Fig. E) which are
installed on the Casse
Ʃ
e in front of terminals. Condi
Ɵ
on should
not be able to move the shu
Ʃ
er plate.
4/3/3!؏๕؏ॐ
߰ڔӱۨǖ
Ҿඇۨ
CASSETTE
؏ॐ
C
B
A
D
E
C
B
!Bǖ؏ॐڔӱࠬ࿋ዃ!D!Ċ!ڔӱ߇ĂC!Ċ!ᄩդڔӱൻۯഗ
!Cǖ֭ࠬҾඇ߇
!Dǖጎዃۨ
!Eǖೝዕ܋ฉҾጎڦڔӱ
!Fǖؽዕ܋ฉҾጎڦڔӱ
Fig. A : Casse
Ʃ
e shu
Ʃ
er Padlocking Loca
Ɵ
on C- Shu
Ʃ
er locking bar, B-
Racking handle shu
Ʃ
er drive
Fig. B : Inser
Ɵ
on of padlock on Security locking bar
Fig. C : Device locked out
Fig. D : Shu
Ʃ
er installed for Horizontal termina
Ɵ
ons
Fig. E : Shu
Ʃ
er installed for Ver
Ɵ
cal termina
Ɵ
ons
NF1:ဣଚگუഘୟഗ