English
98
Troubleshooting
Problem
Possible cause
Solution
Device cannot
be operated.
Device blocked or
“frozen”.
Disconnect the mains
adapter from the wall
socket for approx.
5 seconds. Then switch
the device on again.
Alarm sound not
audible.
Switch on the back
is set to the “SPK”
position.
Set the switch to the
“FM” position.
No audio signal
during playback
via induction
function.
Switch on the back
is set to the “FM”
position.
Set the switch to the
“SPK” position.
Audio source is not
aligned with the
correct position on
the device.
Change the position of
the audio source. Make
sure to place the built-
in speaker of your audio
source on position (5) of
the device.
Induction function
switched off.
Press the button (6) until
the indicator lamp (4)
lights up.
Interfering noise
during music
playback via in-
duction function.
Battery voltage too
low.
Insert new batteries or
use the mains adapter
provided.
Audio source
features a metal
housing.
Use an audio source
without metal housing.
