AEG NSC7G751ES, User Manual

4.7 Extra Cool function

With the Extra Cool function, you may

rapidly cool large amounts of warm food,

for example after doing grocery

shopping, without warming food already

stored in the fridge compartment.
To activate the function, press the Extra

Cool button.
The Extra Cool indicator lights up. The

fan activates automatically for the

function duration.
This function stops automatically. Once

the function is off, the Extra Cool

indicator goes out.
Press the Extra Cool button to deactivate

the Extra Cool function before it

automatically ends.

To set a different fridge

temperature, switch off the

Extra Cool function and refer

to "Temperature regulation".

4.8 Extra Freeze function

Extra Freeze function is used to pre-

freeze and fast freeze in sequence in the

freezer compartment. This function

accelerates the freezing of fresh food

and, at the same time, protects

foodstuffs already stored from

undesirable warming.

To freeze fresh food,

activate the Extra Freeze

function at least 24 hours

before placing the food to

complete pre-freezing.

To activate this function, press the Extra

Freeze button.
The Extra Freeze indicator lights up. The

Extra Freeze function stops automatically

after 52 hours.
Press the Extra Freeze button to

deactivate the Extra Freeze function

before it automatically ends.

4.9 Fan function

The fridge compartment is equipped with

a device that allows rapid cooling of food

and ensures high uniformity of

temperature in the compartment.

This device activates automatically when

needed or manually.
To switch on the function, press the Fan

button. The Fan indicator lights up.
To switch off the function, press again

the Fan button. The Fan indicator goes

out.

If the function is activated

automatically, the Fan

indicator will not light up.

The activation of the Fan

function may increase the

noise and energy

consumption.

The fan stops when the door is opened

and restarts immediately after the door is

closed.

4.10 High temperature alarm

When the temperature in the freezer

compartment increases (for example due

to an earlier power failure), the alarm

indicator flashes, the freezer temperature

indicator shows H° and blinks and the

sound is on.

To deactivate the alarm, press the

freezer temperature button.
The alarm indicator and sound go off.

The freezer temperature indicator shows

H° for 5 seconds before indicating the

freezer temperature again.

The alarm restarts one hour

after deactivation until the

normal conditions are

restored.

If you do not press any

button, the sound switches

off automatically after

around one hour to avoid

disturbing.

4.11 Door open alarm

If the fridge door is left open for

approximately 5 minutes or if the freezer

door is left open for approximately 80

seconds, the sound is on and the door

open alarm indicator turns on. The

internal fridge light may also start

flashing.

ENGLISH

11