AEG NSC7G751ES, User Manual

The alarm stops after closing the door.

Press any button to switch off the sound

and flashing of the internal fridge light.

If you do not press any

button, the sound switches

off automatically after

around one hour to avoid

disturbing.

4.12 Setting mode

The Setting mode allows you to:
• Enable or disable the ECOMETER

indicator

• Enable or disable the button sounds

• Change the temperature units from °C

to °F

• Reset the control panel to factory

settings

Activating the Setting mode
To activate the Setting mode:

1. Press and hold the ECO button for

approximately 3 seconds. When the

Setting mode is being activated, the
display shows a blinking 

.

2. Once the Setting mode is switched

on, the display shows 

.

To deactivate the Setting mode, press

and hold the ECO button for

approximately 3 seconds.
The Setting mode deactivates

automatically if you do not interact with

the control panel for 60 seconds.
Navigating the Setting mode
1. Activate the Setting mode (refer to

"Activating the Setting mode").
The display shows 

.

2. Tap the Fridge temperature button

(on the left) to change the parameter

and the Freezer temperature button

(on the right) to change the

parameter value.

Display

Default parame‐

ters

ECOMETER indica‐

tor

Button sounds

Display

Default parame‐

ters

Temperature units

Factory settings

ECOMETER indicator
In order to switch the ECOMETER on or

off:
1. Activate the Setting mode (refer to

"Activating the Setting mode").
The display shows 

.

2. Tap 

 repeatedly. The indicator will

show respectively 

 for the enabled

or 

 for the disabled ECOMETER

indicator.

3. Press and hold the ECO button for

approximately 3 seconds to exit the

Setting mode.

Button sounds
You can enable or disable the button

sounds in the Setting mode. To enable or

disable the sounds:
1. Activate the Setting mode (refer to

"Activating the Setting mode").
The display shows 

.

2. Tap 

 repeatedly until you see 

.

Tap 

 to switch the sounds either

on or off. The indicator will change to

 for the enabled or 

 for the

disabled sounds.

3. Press and hold the ECO button for

approximately 3 seconds to exit the

Setting mode.

Temperature units
Using the Setting mode, you can change

the temperature unit displayed on the

control panel from Celsius to Fahrenheit.

To change the temperature unit:
1. Activate the Setting mode (refer to

"Activating the Setting mode").
The display shows 

.

2. Tap 

 repeatedly until you see 

and 

. Tap the indicator showing

www.aeg.com

12