Operating Instructions
24
Starting the washing program
0
1.
Check that the water tap is open.
2.
Start the washing program:
Press the START/PAUSE button
The washing program is started or starts at the
end of the time delay set.
3
The door is not correctly closed if, when the button START/PAUSE
is pressed,
–
the error code
Cd
is shown in the multi-display and
–
the indicators PRE WASH, RINSE and RINSE+ flash
In this case, press the door firmly closed and again press the
START/PAUSE button.
If the delay timer has been set:
The start time delay set on the time delay counts down; the time
remaining until the program starts is displayed in the multi-display
(in hours remaining, e.g.
5h
). During this time you can add washing and
change or stop the delay timer.
•
Load the washing: Press the START/PAUSE button. The door can be
opened. Then close the door and press the START/PAUSE button
again.
•
Changing or stopping delay timer: Press the DELAY TIMER button re-
peatedly until the desired time is displayed. When the program dura-
tion is displayed (display in minutes e. g.
120
) the washing program
starts without delay.
Summary of Contents for OKO-LAVAMAT 74760
Page 1: ...ÖKO LAVAMAT 76760 update The environmentally friendly washing machine User information ...
Page 55: ...55 ...
Page 56: ...56 ...
Page 57: ...57 ...
