9
|
P a g e
Trouble Shooting
If any problem occurs, please detach the plug from the
socket and contact Euro-Parts or a similarly qualified
person in order to avoid a hazard.
Problem
Cause
Solution
Light on, but
motor does not
work
The outlet valve is
blocked
Detach flue and duct
then turn on the hood
to check if the valves
open
The capacitor has
failed
Call for technical
service
The control switch
has broken
Call for technical
service
Light does not
work, motor
does not work
No power supply
Plug another appliance
into the socket to
confirm there is power
supply
Fuse has blown
Open up the plug and
replace he 13A fuse
Vibration
The propeller is
damaged or
unbalanced
Call for technical
service
The hood is not
installed correctly
Review the installation
instructions and check
the installation again
for loose screws,
brackets or
connections
Insufficient
suction effect
The distance
between the hood
and cooktop is too
great
Check that the
distance is between
600mm and 762mm
The filters are
saturated
Clean the filters from
grease residue and
replace after cleaning
