English
55
Change the roller
For hygiene reasons, rollers are colour-coded for different users.
1. If you want to change or clean a roller, turn the roller head (2) in
the OPEN direction.
2. The roller can now be easily removed.
3. Slide the new or cleaned roller into the attachment (3).
4. Secure the roller by turning the roller head in the CLOSE direc-
tion. Please ensure that the mark on the roller lies directly above
the mark on the appliance (see figure).
Lady shaver
• Guide the appliance over the skin so that the long hair trimmer and the shaver foil
touch the skin at the same time.
• Guide the appliance slowly against the direction of the hair growth.
WARNING!
•
Shaving the armpits and bikini area:
The skin in these areas is sensitive. To avoid injury, always pull the skin tight with your
free hand.
• Watch out for skin unevenness e.g. Fibromas. The long hair trimmer should not run
over these areas.
NOTE:
Avoid the use of skin-irritating substances, e.g. deodorants containing alcohol, after
removing hair.
On/Off switch
• The appliance has two speed settings.
• There is an LED on the switch to illuminate the work area during use.
Switch on: Slide the on/off switch to position
I
or
II
.
Switch off: Slide the on/off switch to position
O
.
