![background image](http://html.mh-extra.com/html/aeg/prosource/prosource_installation-and-user-manual_8550044.webp)
42 www.aeg.com
Problem
Cause
Solution
Flow rate too high
Too much pressure
•
Close the valve of the
pressure safety valve (23)
or the cold water supply
valve.
•
Place a pressure
reducing valve
Water drips from
the discharge pipe
of the pressure-
relief device
•
Do not do anything. This
is normal.
8.
TECHNICAL INFORMATION
8.1 Important other technical information
•
Refer to the separate manuals supplied with the other components for other
relevant technical information.
8.2 General data
Name
AEG ProSource
Ambient temperature
4~38 °C
Humidity range
25~85% relative humidity (RH)
Maximum operation height
2000 m
Protection grade
IPX4
8.3 Electrical data
4 litre
8 litre
Connection
Earthed AC wall socket
Voltage supply
230 V AC; 50 Hz
Max. power consumption
2200 W
Standby power loss (in ON position)
15 W
20 W
Standby power loss (in OFF position)
0.4 W
0.4 W
Summary of Contents for PROSOURCE
