8
EN
2
General Information
The Protect B.PRO is an
U
ninterruptible
P
ower
S
upply
(UPS) for important electrical loads such as personal
computers, workstations, servers, network compo-
nents, telecommunication equipment and similar
electrical loads.
The Protect B.
PRO series is a compact, interactive, sinusoidal-
type UPS available with output power ratings of 750, 1000, 1400,
1800, 2300 and 3000 VA.
The UPS was designed for either horizontal
/
lying operation
(rack
/
19" with 2
U), or vertical/upright operation (tower).
2.1
Brief overview
The front of the UPS features the liquid crystal display and four
push buttons, enabling easy configuration, monitoring and
control and which display the AC mains status, information on
mains faults and the output status of the UPS. Two bar displays
for load and battery capacity indication, various status displays
(including mains
/ battery mode, for example) and for alarm
activation in case of mains failure, overload, output-side short-
circuit, discharged battery or a faulty battery system provide
considerable insight into the current operating situation.
Numerous measured values which can be shown on the display
of the UPS regarding the input
/ output, the battery and the
connected load provide further detailed information if needed.
Precise display of the remaining operating time based on the
current connected load facilitates controlled shutdown in battery
mode.
The back of the Protect B. PRO features the mains connections,
communication interfaces and connections for data cable
overvoltage protection. Manageable output sockets make
targeted load segmentation possible. Important UPS data are
monitored continuously and transferred to the computer using
the USB or RS232 interface and the CompuWatch software.
With the optional SNMP adapter, remote monitoring via an
SNMP connection and multiserver shutdowns are possible.
i
