43
8
Signalling and Error Correction
8.1 Signalling
1.
OFF push button (OFF):
Press the OFF switch
for about 2 seconds to switch on the UPS
2.
ON push button (ON):
Press the ON switch for
about 2 seconds to switch off the UPS.
Deactivate
acoustic alarm
: By pressing this
switch for about 2 seconds during the alarm an
acoustic alarm can be deactivated.
UPS Test: To execute an UPS self test press this
button for about 2 seconds in the normal operation
mode.
3.
LED Bypass:
The orange-coloured LED lights up
when the UPS system is supplying voltage
provided by the mains power via the bypass.
4.
LED Inverter:
The green-coloured LED lights up if
the UPS system is supplying voltage provided by
the mains power via the inverter.
1
2
3
4
5
6
7
8
9
10
11
12
