![background image](http://html.mh-extra.com/html/aeg/ps254db/ps254db_original-instructions-manual_14486013.webp)
13
13
TECHNICAL DATA
SLIDING COMPOUND MITRE SAW
PS254DB
Rated input
220V - 240V ~ 50 Hz
Rated current
7.5 A
Rated power
1800 W
Weight
24.6 kg
Maximum cutting depth
89 mm
No-load speed
4800 min
-1
Saw blade diameter x hole diameter
254 x 30 mm
Saw blade thickness / kerf
1.8 mm / 2.5 mm
Maximum cutting capacity
Mitre 0°/ Bevel 0° Hi-capacity
89 mm x 305 mm
Mitre 45°/ Bevel 0°
89 mm × 203 mm
Mitre 0°/ Bevel 45° (left)
51 mm × 305 mm
Mitre 0°/ Bevel 45° (right)
38 mm × 305 mm
Mitre 0°/ Bevel 48° (left)
38 mm × 305 mm
Mitre 0°/ Bevel 48° (right)
19 mm × 305 mm
Mitre 45°/ Bevel 45° (left)
51 mm × 203 mm
Mitre 45°/ Bevel 45° (right)
38 mm × 203 mm
Mitre 45°/ Bevel 48° (left)
38 mm × 203 mm
Mitre 45° (left) / Bevel 48° (right)
19 mm × 203 mm
Mitre 70°/ Bevel 0°
38 mm × 102 mm
Vertical Base (laid flat on turning table)
Mitre 45°/ Bevel 0°
153 mm × 19 mm
Nested Crown (laid flat on turning table)
Mitre 45°/ Bevel 0°
168 mm
Maximum mitre angle
70°
Maximum bevel angle
48°
Minimum workpiece dimensions
215 mm × 35 mm × 2.5 mm
Measured values determined according to EN 62841
A-weighted sound pressure level
L
pA
= 95.2 dB(A)
Uncertainty K
K = 3 dB(A)
Measured values determined according to EN 62841
A-weighted sound power level
L
wA
= 108.1 dB(A)
Uncertainty K
K = 3 dB(A)
WARNING!
The declared noise emission value(s) have been measured in accordance with a standard test method of EN 62841-1 and EN 62841-3-9, and
may be used for comparing one tool with another.
The declared noise value(s) may also be used in a preliminary assessment of exposure.
The noise emissions during actual use of the power tool can differ from the declared values depending on the ways in which the tool is used
especially what kind of workpiece is processed.
Identify safety measures to protect the operator based on an estimation of exposure in the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Wear hearing protection. Exposure to noise can cause hearing loss.
REPLACEMENT PARTS
Saw blade
089315001009
Combination wrench
089240013065
Work clamp
089315001301
Dust bag
089315001302
Throat plate
089240013085
Crown stop
089041028721
Brush
089041028055