9
www.aeg.com
GB
DE
AR
ES
FR
GR
IT
NL
PT
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Soleplate is not heating even though
iron is turned on.
Connection problem
Check main power supply cable, plug
and outlet.
Temperature control is in MIN position. Select adequate temperature.
Iron does not produce steam.
Not enough water in tank.
Fill water tank (see “Getting started”).
Steam control is selected in non-steam
position (‘MIN’).
Set steam control between positions of
minimum steam and maximum steam
(see “Ironing chart”).
Selected temperature is lower than
that specified to use with steam.
Increase temperature to at least .
Steam jet and vertical steam jet
function does not work.
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough.
Adjust the proper temperature to steam
ironing (up to
). Put iron in vertical
position and wait until temperature
indicator light turns off.
Water leaks from the soleplate during
ironing.
The iron is not hot enough.
Set the temperature dial to a
temperature
( to maximum) suitable for steam
ironing. Put the iron on its heel and wait
until the light has gone out before you
start ironing.
Flakes and impurities come out of the
soleplate during ironing.
You have used hard water, which has
caused scale flakes to develop in the
water tank.
Press and hold the steam button for
about one minute to get steam. Then
hold one more minute in order to clean
the steam generating system.
Iron an old towel, to ensure that
any residues inside the iron are not
transferred to the laundry.
Water leaks from the soleplate while
the iron is cooling down or after it has
been stored.
The iron has been put in horizontal
position while there is still water in the
water tank.
Empty the water tank and set the steam
control to position off before storing
the iron.
Brown streaks come out of the
soleplate while ironing and stain the
linen.
You have used chemical descaling
agents.
Do not use any descaling agents.
Fabric fibres have accumulated in the
holes of the soleplate and are burning.
Clean the soleplate with a damp soft
cloth.
Fabrics might not be properly rinsed
or the garments are new and have not
been washed before ironing.
Please rinse the laundry properly again.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an AEG service center that can
remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for
the separate collection of electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specifications without notice.
DBS3350_SteamStation_AEG_NO-FARSI.indd 9
2017-07-06 14:21:02
