EN -29-
BEFORE CALLING YOUR AFTER SALES SERVICE
PART - 6.
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels
or if a problem occurs with the appliance. Warning codes are displayed in the freezer and
cooler indicators.
ERROR TYPE
MEANING
WHY
WHAT TO DO
E01
Sensor warning
Call Service for assistance as
soon as possible.
E02
E03
E06
E07
E08
Low Voltage
Warning
Power supply to the
device has dropped to
below 170 V.
-
This is not a device
failure, this error helps to
prevent damages to the
compressor.
-
The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
E09
Freezer
compartment is not
cold enough
Likely to occur after
long term power failure.
1.
Set the freezer
temperature to a colder
value or set Super Freeze.
This should remove
the error code once the
required temperature has
been reached. Keep doors
closed to improve time
taken to reach the correct
temperature.
2.
Remove any products
which have thawed/
defrosted during this error.
They can be used within a
short period of time.
3.
Do not add any fresh
produce to the freezer
compartment until the
correct temperature has
been reached and the error
is no longer.
If this warning continues an
authorised technician needs
to be contacted.
Summary of Contents for RCB732E5MW
