User information
17
Starting a programme
1. Check that the water tap is open.
2. Press the START/PAUSE key (DEPART/PAUSE) .
The programme is started or it starts after the time delay set has
elapsed.
If after pressing the START/PAUSE key (DEPART/PAUSE) the
display shows “Door not closed”, the door has not been shut properly.
Push the door firmly closed and press the START/PAUSE key (DEPART/
PAUSE) again.
Programme progress
The display indicates the stage of
the programme that is currently
being performed as well as the
time of the end of the
programme.
During the washing cycle the
time of the end of the programme
may change as the programme
adjusts itself to different conditions
(e. g., type and quantity of laundry,
out of balance spin detection,
special rinses, etc.).
Interrupting a programme / Adding washing
Interrupting a programme
• The wash programme can be interrupted at any time by pressing
the START/PAUSE key (DEPART/PAUSE). It is then re-started by
pressing the key again.
• To stop the washing machine before the programme has ended,
turn the programme knob to OFF.
Important
: Be careful if there is water in the appliance !
LINEN/EASY CARES
12.45
Wash
14.37
50°C
800
TEMPS
OK
OPTION
T/MIN
TEMP. °C