background image

EN -18-

Hints for Energy Saving

1. 

Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near 

a heat source (such as a radiator or oven) otherwise an insulating plate should be used.

2. 

Allow warm food and drinks to cool before placing them inside the appliance.

3. 

Drinks or other liquids should be covered when inside the appliance. If left uncovered, the 

humidity inside the appliance will increase, therefore the appliance uses more energy. Keeping 

drinks and other liquids covered helps preserve their smell and taste.
4. Avoid keeping the doors open for long periods and opening the doors too frequently as 

warm air will enter the appliance and cause the compressor to switch on unnecessarily often.

5. 

Keep  the  covers  of  the  different  temperature  compartments  (  such  as  the  crisper  and 

chiller) closed.

6. 

 The door gasket must be clean and pliable. In case of wear, if your gasket is detachable, 

replace the gasket. If not detachable, you have to replace the door.

7. 

Eco mode / default setting function preserves fresh foods while saving energy.

8. 

 Fresh  Food  Compartment  (Fridge):  Most  efficient  use  of  energy  is  ensured  in  the 

configuration with the drawers in the bottom part of the appliance, and shelves evenly.

The door is not opening and closing properly
Check if:

•  There is food or packaging preventing the door from closing
•  The door compartments, shelves and drawers are placed properly
•  The door joints are broken or torn
•  Your fridge is level.

Recommendations

To stop the appliance completely, unplug from main socket (for cleaning and when the door 

is left open).

Summary of Contents for RKB638E2MX

























Reviews: