EN -22-
If your fridge is not working properly, it may be a minor problem, therefore check the following,
before calling an electrician to save time and money.
Your fridge is not operating
Check if:
• There is power
• The plug is correctly connected to the socket
• The plug or mains fuse has blown
• The socket is faulty. Examine this by plugging your fridge into a working socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance ,
• The fridge temperature set to 8.
• The door is closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
ERROR TYPE
MEANING
WHY
WHAT TO DO
E10
Fridge
compartment is not
cold enough
Likely to occur after:
-
Long term power
failure.
-
Hot food has been left
in the fridge.
1.
Set the fridge temperature
to a colder value or
set Super Cool. This
should remove the error
code once the required
temperature has been
reached. Keep doors
closed to improve time
taken to reach the correct
temperature.
2.
Please empty the location
at the front area of air duct
channel holes and avoid
putting food close to the
sensor.
If this warning continues an
authorised technician needs
to be contacted.
E11
Fridge
compartment is too
cold
Various
1.
Check is Super Cool mode
is activated
2.
Reduce the fridge
compartment temperature
3.
Check to see if vents are
clear and not clogged
If this warning continues an
authorised technician needs
to be contacted.
Summary of Contents for RKB738E5MX
