25
ENGLISH
11.4 Cabinet Leveling &
Refrigerator Door
Alignment (if necessary)
Guidelines for final positioning
of refrigerator:
• All four corners of the cabinet must
rest firmly on the floor.
• The front should be slightly elevated
to ensure that doors close and seal
properly.
• Doors should align with each other
and be level.
Most of these conditions can be met by
raising or lowering the adjustable front
rollers.
To level the cabinet using the front rollers:
1.
Slightly open freezer drawer.
2.
Lower anti-tip legs until they are both
touching the floor. Once on the floor,
use a pair of pliers to adjust.
To raise unit:
turn leg clockwise.
To lower unit:
turn leg
counterclockwise.
3.
Ensure both doors are bind-free with
their seals touching the cabinet on all
four sides and that cabinet is stable.
'RRU
'RRU
$QWL7LS
/HJV
To make final door height adjustments:
1.
Open freezer drawer to make lower
hinge visible.
2.
Insert 6mm Allen wrench into the
shaft of the lower hinge.
3.
Adjust the height by turning clockwise
or counterclockwise. Turning
clockwise will lower the door. Turning
counterclockwise will raise the door.
Default setting is to the lowest height.
5DLVH
11.5 Flipper Mullion
Adjust Flipper Mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded
and perpendicular to the fresh food door.
If the mullion guide is not in the correct
position, it could prevent the door from
closing completely.
:521*
Summary of Contents for RMB96719CX
