1. Fit the spacers into the holes. Make sure
that the arrow (A) is positioned as
shown in the picture.
2. Turn counter-clockwise the spacers
through 45° until they lock into place.
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two adjust
-
able feet at the bottom in front.
Location
The appliance should be installed well away
from sources of heat such as radiators, boilers, di
-
rect sunlight etc. Ensure that air can circulate
freely around the back of the cabinet.To ensure
best performance, if the appliance is positioned
below an overhanging wall unit, the minimum
distance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally, how
-
ever, the appliance should not be positioned be
-
low overhanging wall units. Accurate levelling is
ensured by one or more adjustable feet at the
base of the cabinet. If the cabinet is placed in a
45
˚
A
15mm
15mm
100mm
32
Installation
Summary of Contents for S60240DT28
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...www aeg electrolux com shop 200383204 B 302010 ...