AEG S92700CNM0, User Manual

4.4 

Ice-cube production

This appliance is equipped with two trays

for the production of ice-cubes.

1.

Fill the trays with water.

2.

Put the trays in the freezer

compartment

CAUTION!

Do not use metallic

instruments to remove the

tray from the freezer.

4.5 

Cold accumulators

The freezer contains at least one cold

accumulator which increases storage

time in the event of a power cut or

breakdown.

4.6 

Wine arrangement

The temperature can be adjusted

b 6 and + 16°C.
This compartment is ideal for storing and

refining red or white wines for long

periods.
• Lay the bottles down in such a way

that the corks do not dry.

• Keep the wine in the dark. The door is

in anti-UV darkened double glass to

protect the wine from the light in case

the appliance is located in a well-lit

place.

• Avoid switching the appliance light on

too often or for too long. Wine keeps

better in the dark.

• Handle the bottles with care, to avoid

agitating the wine.

Follow the

recommendations and

advice received at the time

of purchase or given in the

technical documentation

regarding the quality,

duration and optimum

storage temperature of the

wine.

4.7 

Air circulation

• Do not cover the shelves

with any protective

material, such as paper,

cardboard or plastic,

which may obstruct the

air circulation through

them.

• Do not place the bottles

at directly against the

back wall of the

compartment which will

obstruct the air

circulation through them.

4.8 

Storage advice

The storage time for wine depends on

ageing, the type of grapes, alcoholic

content and level of fructose and tannin

contained in it. At the time of purchase,

check if the wine is already aged or if it

will improve over time.

4.9 

Wine Cooler shelves

The shelves can be removed for

cleaning.
Adjust the shelves as follows:

• The long shelves must be placed on

the horizontal guides.

• Only the short shelf can be inserted in

the shelf support structure in an

inclined position. During this

operation, make sure that the rear

pins are properly inserted in the

guides.

• The shelf support structure must be

placed at the bottom of the

compartment.

ENGLISH

9