19
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance
should therefore
Ð not be exposed to direct sunlight;
Ð not be installed next to radiators, cookers or other sources of heat;
Ð only be installed at a location whose ambient temperature corre-
sponds to the climate classification, for which the appliance is desi-
gned.
The climate classification can be found on the serial plate, which is
located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for
each climate classification:
Climate classification
for an ambient temperature of
SN
+10 to +32 ¡C
N
+16 to +32 ¡C
Your appliance needs air
Air flows in from under the
door, at the front, and flows out
upwards, over the back. For
correct air circulation, it is
important that the ventilation
openings are not covered or
obstructed.
Important If the appliance is
positioned under a kitchen wall
unit, a minimum clearance of
10 cm must be left between
the top of the appliance and
the overhanging wall unit.
