17
Unusual noises.
The appliance is touching the
wall or other objects.
Appliance is not level.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
The compressor starts after a
period of time.
See the "Cleaning and Care"
section.
This is normal, no error has
occurred.
The compressor does not start
immediately after changing
the temperature setting.
Water on the floor or on sto-
rage shelves.
Water drain hole is blocked.
If necessary, carefully bend
the component out of the
way.
Move the appliance slightly.
Readjust the feet.
Malfunction
Possible Cause
Remedy
Changing the light bulb
Warning!
There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
1.
To switch off the appliance, push the
button ON/OFF (A).
2.
Unplug the mains plug.
3.
To change the light bulb press on the
rear hook and at the same time slide
the cover in the direction indicated
by the arrow.
4.
Change the defective light bulb with
one of the some power (the maxi-
mum power is shown on the light
diffuser).
5.
Refit the light bulb cover.
6.
Put the refrigerator back into opera-
tion.
Summary of Contents for SANTO 71340 KA
Page 1: ...SANTO 71340 KA User manual Manual de instruções Fridge Refrigerador ...
Page 38: ......
Page 39: ......
