36
Operating and indicator panel appliance
H.
Mains pilot indicator (green)
I.
Button ON/OFF for the appliance
J.
Temperature setting button (for warmer temperatures)
K.
Temperature display
L.
Temperature setting button (for colder temperatures)
M.
FROSTMATIC function "on" indicator (yellow)
N.
FROSTMATIC button
O.
Alarm reset light
P.
Alarm reset button
Milk bootles: these should have a cap and should be stored in the bottle rack
on the door.
Bananas, potatoes, onions and garlic, if not packed, must not be kept in the
refrigerator.
Starting Up - Setting the Temperature
1.
Plug the mains plug into the mains socket.
2.
Press ON/OFF button. (I) for the functioning of the whole appliance.
The green mains pilot indicator illuminates. The alarm light flashes since the
temperature is reached. The buzzer sounds.
3.
Pressing button “P” the buzzer stops.
4.
Press either the „J“ or „L” button. The temperature display switches over and
the DESIRED temperature currently set flashes on the temperature display.
5.
Set the required temperature by pressing the „J“ or „L“ buttons (see section
"Temperature setting buttons"). The temperature display will immediately
show the changed setting. Each time the button is pressed the temperatu-
re is adjusted by 1 °C.
From a food safety point of view -18 °C should be considered sufficiently
cold for storing food in the freezer.
6.
The alarm light,when the set temperature is reached. Press the alarm but-
ton to turn off the buzzer.
°C
°C
°C
°C
H
I
J
K
L
M N
O
P
ON/OFF
ON/OFF
ALARM OFF
