19
Inner door reversal
1.
Using a screwdriver release bracket
(1) by pressing on the internal spring
and withdraw it from its seat
together with the door; remove plug
(2) and fit it in the hole left open on
the opposite side; turn the door
through 180°, remove the bracket (1)
and refit it on the opposite side.
2.
Refit the door and insert the top pin
and bottom bracket (1), pushing it
into place.
To ensure correct storage of food, the door is fitted with a simple spring
device which holds it in the open position until it is properly closed.
PR14
1
2
180°
1.
Unscrew the upper pin and remove
the spacer
2.
Remove the door
3.
Refit the door, the upper pin and the
spacer on the opposite side
4.
Unscrew the lower pin and remove
the spacer and refit them on the
opposite side.