background image

8

Temperature display

The temperature display can indicate several pieces of information.

During normal operation, the temperature currently present in the fridge
(ACTUAL temperature) is displayed. 

When  the  temperature  is  being  adjusted  a  flashing  display  indicates  the
fridge temperature currently set (DESIRED temperature). 

Starting Up - Setting the Temperature

1.

Plug the mains plug into the mains socket. 

2.

If the display is OFF press ON/OFF button. The green mains pilot indicator
illuminates. The appliances start.

3.

Press either the “C“ (+) or “E“ (-) button. The temperature display switches
over and the DESIRED temperature currently set flashes on the temperatu-
re display.

4.

Set the required temperature by pressing the “C“ (+) or “E“ (-) buttons (see
section "Temperature setting buttons"). The temperature display will imme-
diately show the changed setting. Each time the button is pressed the tem-
perature is adjusted by 1 °C.
From a food safety point of view +5 °C should be considered sufficiently
cold for storing food in the fridge.

5.

Once the required temperature has been set, after a short period (approx. 5
sec.)  the  temperature  display  will  change  and  again  indicate  the  current
ACTUAL temperature inside the fridge. The display will change from flashing
to continuous illumination.

Information!

When the setting is changed, the compressor does not start

immediately if automatic defrosting is currently taking place. As the stora-
ge  temperature  within  the  fridge  is  reached  quickly  you  can  store  food
immediately after switching on.

COOLMATIC 

The COOLMATIC function is suited for quick cooling of large quantities of
goods in the refrigerator.

1.

The COOLMATIC function is switched on by pressing the COOLMATIC but-
ton. The yellow light illuminates.
The  COOLMATIC  function  now  provides  for  intensive  cooling.  The  COOL-
MATIC function is ended automatically after a period of 6 hours. 

2.

The COOLMATIC function can be ended manually at any time by pressing
the COOLMATIC button again. The yellow light goes out.

13

The food is too warm.

Interior lighting does not
work.

The appliance is near a heat
source.

Temperature is not properly
adjusted.

Please look in the "Initial Start
Up" section.

Light bulb is defective.

Please look in the "Changing
the Light Bulb" section.

Turn the temperature regula-
tor to a colder setting tempo-
rarily.

Door was open for an exten-
ded period.

Please look in the "Installation
location" section.

A large quantity of warm
food was placed in the
appliance within the last 24
hours.

Open the door only as long as
necessary.

Heavy build up of frost, possi-
bly also on the door seal.

Door seal is not air tight (pos-
sibly after changing over the
hinges).

Carefully warm the leaking
sections of the door seal with
a hair dryer (not hotter than
approx. 50 °C). At the same
time shape the warmed door
seal by hand such that it sits
correctly.

Malfunction

Possible Cause

Remedy

Unusual noises.

The appliance is touching the
wall or other objects.

Appliance is not level.

A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.

The compressor starts after a
period of time.

See the "Cleaning and Care"
section.

This is normal, no error has
occurred.

The compressor does not start
immediately after changing
the temperature setting.

Water on the floor or on sto-
rage shelves.

Water drain hole is blocked.

If necessary, carefully bend
the component out of the
way.

Move the appliance slightly.

Readjust the feet.

Summary of Contents for SANTO K 9 18 00-4 i





















Reviews: