AEG SCB61812LS, User Manual

Problem

Possible cause

Solution

The thickness of the frost is
greater than 4-5 mm.

Defrost the appliance.

The door has been
opened often.

Open the door only if necessa-
ry.

There is no cold air circula-
tion in the appliance.

Make sure that there is cold air
circulation in the appliance.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

7.2 

Replacing the lamp

The appliance is equipped with a longlife

LED interior light.
Only service is allowed to replace the

lighting device. Contact your Authorised

Service Centre.

7.3 

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to

assembly instructions.

3.

If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

8. 

INSTALLATION

8.1 

Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

8.2 

Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

Climate
class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

Climate
class

Ambient temperature

T

+16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

ENGLISH

13